News

Preservation Of DTH Hammers And Drill Pipe

Update:21-04-2023
Abstract:If you want to save DTH hammers properly, it is recommended to follow the steps below: Cleaning DTH hammers: Before stor...

If you want to save DTH hammers properly, it is recommended to follow the steps below:

Cleaning DTH hammers: Before storing DTH hammers, you need to clean them thoroughly. Clean the surface with a soft cloth or brush, making sure to remove any dust, dirt, or grease.

Lubricate DTH hammers: The parts of DTH hammers require lubrication to function properly. Before storing, apply a coat of lube or film oil to keep the parts running smoothly.

Moisture Resistant: Electronic components inside DTH hammers are easily affected by moisture. Therefore, you need to store your DTH hammers in a dry place to avoid moisture ingress.

Proper Packaging: To prevent DTH hammers from being damaged during shipping or storage, you can wrap them with proper packing material, such as foam board or bubble wrap.

Regular checks: Even if your DTH hammers are not in use, you should check their status regularly. Repair or replace parts promptly if any damage or wear is found.

In conclusion, the correct storage method can prolong the life of DTH hammers and ensure that they can work normally when needed.

Drill pipe is a tool used in conjunction with DTH hammers. It transmits the impact force from DTH hammers to the drill bit to help the drill bit drill into the ground. Proper storage and maintenance of drill pipes can prolong their service life and avoid problems during use. Here are some suggestions for preserving drill pipe:

Cleaning the drill pipe: After using the drill pipe, it should be cleaned to remove the dirt and dust on it to avoid corrosion and damage to the surface of the drill pipe and the internal pipe.

Keep dry: The metal part of the drill pipe is susceptible to moisture, so it should be stored in a dry place, avoiding prolonged periods of humidity.

Prevent damage: When storing and handling drill pipes, care should be taken to avoid collision and friction with other hard objects to prevent scratches and damage on the surface of the drill pipes.

Lubricant: Before using the drill pipe, a layer of lubricant can be applied to reduce the friction between the drill pipe and the underground drilling tool and protect the drill pipe.

Regular inspection: Before using the drill pipe, you should carefully check whether the drill pipe is damaged and cracked, check whether the pipeline is blocked or blocked, and maintain and replace it in time.